IJ Start Canon Setup to Connect your printer to your device.

We have described in detailed how to install a canon printer setup via ij start canon technique in this post. We demonstrated how to configure a wired and wireless connection for both Windows and Mac operating systems.

You must first complete the following steps before you can set up IJ.Start.Cannon Photocopier

• Always have the model number of your printer accessible before commencing the setup process.

• Check to verify if you have adequate storage space on your device to install the driver.

• Check that the printer is properly connected to the power outlet.

• Check to determine if your device is linked to the internet.

Canon Printer Setup for Windows (Wireless) - ij.start.canon User Manual

• To begin, go to ij start canon setup and download and install the driver for your printer.

• Turn on your Canon printer and make sure the power switch is properly inserted.

• Then, open the downloaded driver setup file and go to the screen where you can pick “Wireless Setup.”

• Return to the Canon printer’s screen and press the WiFi configuration button after you’ve selected the wireless option.

• After you’ve chosen the device settings, click OK.

• Then, go to Device Settings>LAN Settings and click the ‘OK’ button.

• LAN Settings>Wireless Lan Setup, and then press the ‘OK’ button. Your printer will now attempt to locate an access point.

• Verify that your WiFi router is turned on. The printer’s WiFi flash lamp will now blink.

• Following that, the screen will display a network list. Select your WiFi network from the list and press the ‘OK’ button.

• It will now ask for your WPA/WEP key (WiFi password). Fill in your correct password here, then click the ‘OK’ button.

• In a few moments, your printer will join the WiFi network.

• As a consequence, by following the above directions, you will be able to easily complete Canon ij wireless setup for your Windows PC.

Using a USB Cable to Install a ij.start.canon Printer on Windows - ij.start.canon.com/

• To begin, go to http://ij.start.cannon and download and install the Canon printer driver.

• Using a USB cable, connect the printer to the Windows PC.

• Open the ‘Control panel’ from the ‘Run’ dialogue box by searching for it in Windows.

• Select ‘Devices and Printers.’ A Green checkmark should now appear next to your printer.

• If your printer isn’t shown, click ‘Add printer’ to manually add it.

• Finally, your printer has been added and is ready to go.

How to Install a Canon Printer on a Mac Using ij start cannon?

• Before proceeding, download and install the driver from https://www.canon.com/ijsetup.

• To connect your Canon printer to the same WiFi network as your smartphone, follow the procedures in the first section of this article.

• Then, from the ‘Apple’ menu, select ‘System Preferences.’

• In the System settings box, select the printer-shaped icon labelled “Printers and scanners.”

• After clicking on the “+” sign near the bottom left corner of the screen, a pop-up window will open.

• If your printer is already linked to the network, its name will appear in the left-hand pane. To begin the installation procedure, click on it.

• When the procedure is completed, your printer will be marked with a Green check mark and will be ready to use.

This article includes step-by-step instructions for installing a Canon printer with http//ij.start.canon mac setup. This technique is compatible with wired and wireless connections. Both Windows and Mac computers are aware of it. We used the http://ij.start.canon mac setup function to show how to set up a printer on a Mac.

Using Ij.Start, Canon IJ Setup Guide for Windows (Wireless).

Follow these steps to connect your printer to a wireless network.

• To begin, navigate to http//ij.start.canon mac setup’ and enter the correct printer model number to download the driver for your Canon printer.

• After double-clicking the downloaded driver file from your system, follow the onscreen instructions.

• When a security warning pops up, tap the ‘Rub’ tab to allow the application to run on your system.

• By pressing the ‘Next’ button, select ‘Wireless LAN Connection.’

• Go to your Canon printer and hold down the WiFi button until the alarm lamp flashes twice, then release.

• Now, on the Canon printer screen tab, press the ‘Arrow Button’ to navigate to the ‘Menu’ and select ‘Device Settings.’

• Then go to Menu>Device Settings>LAN Settings>Wireless LAN Setup on the printer and press the ‘OK’ button.

• Your printer will now look for an access point on your router.

• From the printer screen, select your wireless network name and press the ‘OK’ button. Then, on the next screen, type in the WPA Key (WiFi password).

• Your printer must be on your wireless network in order to use IJ Startup Canon Setup.

Following that, we’ll look at how to check to see if your printer has been added to Windows for both wireless and wired connections.

• From the Windows search bar, open the ‘Run’ dialogue box and type ‘Control Panel’ before clicking the ‘OK’ button.

• Select the ‘Devices and printers’ option when the control panel appears.

• A ‘Green Tick Mark’ will appear if your printer has already been added.

• If your printer isn’t listed, select the ‘Add Printer’ option to manually add it.

• It will display a list of currently available printers. Press the ‘OK’ button after selecting your preferred Canon printer. In the ‘Device and Printer’ section, your Canon printer will appear with a ‘Green Check Mark’ after a few seconds.

• Finally, your Canon IJ printer is connected to your Windows system wirelessly.

In this article, we went over how to set up a Canon printer and use its services. We also discussed how to easily connect a Canon printer to a Windows or Mac device using a USB cable or a wireless connection. Furthermore, we have detailed instructions for each step of the https //ij.start.cannon set up. If you continue to have trouble configuring your printer, please contact us via our toll-free helpline.